The cabinet of Labtop Chambers is insulated with high density CFC free Poly Urethane Foam. Interior of the chambers are mirror finish stainless Steel (304 SS, 0.8 mm thick). The exterior is white powder coated (1.0 mm thick) mild steel and the door has magnetic gasket with a keyed door lock. Specially designed solid stainless steel wire mesh trays ensure even temperature distribution and storage inside. GMP models are in total stainless steel (Inside S. S 304 with mirror finish and outside. S.S 304 dull finish and inner S.S316 is also available on request at extra cost ) and the unit is mounted on caster wheels for ease of mobility.
The cooling is effected by CFC free refrigeration system with a condensing unit located inside the chamber. Labtop condensing units are characterised by high-efficiency heat transfer and low power consumption.
|Volume||100 Liters||200 Liters||300 Liters||400 Liters||600 Liters||800 Liters||1000 Liters||1500 Liters||2000 Liters|
|Temperature Range||10.0-60.0 °C (Light ON)|
|Temperature||5.0-60.0 °C (Light OFF)|
|Accuracy||± 0.2 °C|
|Accuracy||±2 % RH|
|Co2 (optional)||300 to 5000 ppm|
|Illumination (LUX)||Up to 20000|
|No. Of tray||2||3||4||4||4||8||8||10||10|
|Power||1500 W||1750 W||1750 W||1750 W||2000 W||2500 W||3500 W||3500 W||3500 W|
|Voltage||230 V AC, 50 / 60Hz|
|DIMENSIONS (W X D X H ) IN MM AND WEIGHT (KG)|
Eight/Sixteen Channel programmable temperature and humidity data Scanner to record, store and print the data online and off line with variable print time intervals, suitable for 80 col. Dot matrix printers
“LABTOP DATALINX “ CFR 21 Part 11 compliance web based communication software for data management. Complete with RS-485 multi dropping to monitor multiple chambers to one software.
Ready to use stand by refrigeration system in case of regular system fails. This includes Compressor, Evaporator, condensers and other accessories.
Ready to use stand by Humidity System in case of regular system fails
Biometric magnetic door access for secured door opening and closing with PC interface communication
Uninterrupted online power supply for PLC in case of power failure.
Additional tray suitable for above equipment as per your requirement.
Mobile alert via GSM Technology in case of system failure.
Calibrated LUX and UV meters for measuring and controlling light intensity and ultraviolet rays.
For GMP complaint models LABTOP offers DQ IQ, OQ and PQ validation with documentation, reports, calibration and test.
The equipment is calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Testing Laboratory (ERTL West) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories (NPL).
The training undertaken by our Channel partners and engineers is of the highest standard in the industry, ensuring that our customers are supported by the highest level of technical expertise and as such can be assured that their equipment will perform to the standards required at all times.
Our wide network of Engineers/Technicians enables us to respond to any technical query, ensuring that our customers receive the maximum benefit from their equipment.
Laboratory (ERTL West) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories (NPL).
Specification subject to change without prior notice