Cryoprecipitate Baths

Home / Blood Bank Equipment / Cryoprecipitate Baths

Cryoprecipitate Baths


Labtop Cryoprecipitate Bath is designed for safe and reliable thaw of fresh frozen plasma for the recovery of cryoprecipitate at 4.0°C Labtop micro controller based plasma thawing bath is table top model designed for quick thawing of Frozen plasma at 37.0ºC and it is a non refrigerated version of cryoprecipitate bath


The cabinet of Labtop baths is insulated with high density CFC free Poly Urethane Foam and the stainless steel seamless inner chamber (SS 316) is eliminating the possibility of rust and leaks, and the rounded corners are easy to clean.


The cooling is effected by CFC free refrigeration system with a condensing unit located inside the chamber. Labtop condensing units are characterised by high-efficiency heat transfer and low power consumption.
  • CFC free refrigeration with time delay to safe guard the compressor
  • Inner grooved copper tubes and slit aluminium fins for superior heat transfer
  • Filter drier for moisture and dirt protection
  • Safety and control devices for better system protection.
  • Thermally protected and permanently lubricated fan motors.


  • Miniature circuit breaker to protect electronic components in case of abnormal power supply.
  • Audio visual alarm for temperature variations from set Values
  • Overload protector for safe guard the compressor
  • 180 seconds time delay for compressor switch ON.
  • With low liquid level indication & automatic cut-off.


  • Micro-control based Temperature controller
  • 4 digit, 7 segment LED display
  • Audio visual alarm when the temperature deviates from the set temperature.
  • Password protected keypad lock
  • Visual alarm for Sensor faulty
  • Display of set value and process
  • High quality PT-100 Sensor for better accuracy
  • Programmable temperature Hi-low alarm setting


  • Integrated pump for internal circulation and uniformity
  • Ergonomic design and easy operation
  • Stainless steel basket for holding the plasma bags
  • Seamless inner chamber with round corners
  • Stainless steel emersion heaters
  • Facility to drain the water from bath
Technical Specifications
Cat. No. LTB -5 LTB -20 LPB-5 LPB-20
No of Plasma Bags 4 15 4 15
Temperature °C 37.0 4.0
Accuracy °C ± 0.2
Control system Micro control
Bath Volume (Ltrs) 5 20 5 20
Bath Size (mm) 150 x 300 x 150 500 x 300 x 150 150 x 300 x 150 500 x 300 x 150
Power (W) 300 500 600 750
Voltage (VAC) 230 , 50/60Hz
External Size (mm) 200 x 490 x 260 350 x715 x 310 320 x 650 x 570 450 x 860 x 660
Packing Size (mm) 327 x 620 x 390 480 x 850 x510 450 x 780 x 770 580 x 990 x 880
Net Weight (Kg) 10 15 36 60
Gross Weight 15 23 50 80


LABTOP offers IQ, OQ, PQ and DQ validation with documentation, reports, calibration and test certificates
The equipment is calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Testing Laboratory (ERTL West) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories (NPL).
Leading Manufacturers, Exporters And Marketers Of Cryoprecipitate Baths
Scroll Up
error: Content is protected !!