High Speed Refrigerated Centrifuge

Home / Centrifuges / high speed refrigerated centrifuge

High Speed Refrigerated Centrifuge

Labtop micro controller based laboratory centrifuge Cat. No. LRC – 10R is Refrigerated version of LRC-10 and it is used in pathology laboratories and research centres. Motorised Safety door interlock on the centrifuge ensures that the rotor does not run with door open while the cover cannot be opened unless rotor comes to complete stop.

SALIENT FEATURES:

  • In built pre cooling programme
  • Facility to Set rpm or RCF
  • Maintenance free Brush less induction motor
  • Variable frequency drive
  • 10 acceleration and deceleration programs
  • Self diagnostic system with error messages
  • Castor wheel for ease of mobility
  • Adjustable Levelling jack
  • Automatic rotor identification
  • Colour display with touch screen
Labtop micro controller based High speed refrigerated research centrifuge LRC – 20R is useful for centrifugation of temperature sensitive materials and widely used in research centres, Bio technology, soil testing laboratories also used in medical laboratories and educational Institutes.
Catalogue number LRC – 20 is a non refrigerated version of LRC – 20R and all other features are same as below.

SALIENT FEATURES:

  • Table top model
  • Colour display with touch screen
  • Automatic rotor identification
  • In built pre cooling programme
  • Hydraulic hinges for
  • Facility to Set rpm or RCF
  • Maintenance free Brush less induction motor
  • Variable frequency drive
  • 10 acceleration and deceleration programs
  • Self diagnostic system with error messages
  • Automatic rotor identification
Technical Specifications
CAT. No. LRC–25R
Max. Speed (rpm) 25000
Speed Accuracy (rpm) ± 50
Max rcf (g) 61250
Max. Volume (ml) 6 x 500
Temperature range(°C) -20.0 – 40.0 (depend on speed)
Timer (min) 1-99
PC Connectivity Ethernet
Data Storage 1000 lines
Noise level dB ≤ 65
Input Power (W) 1000
Input voltage (VAC) 230 , 50/60 Hz
Outer Siz (mm) 625 x 725 x 940
Packing Size (mm) 760x850x1070
Net Weight (kg) 220
Gross Weight (kg) 300
Technical Specifications
Cat. No. LRC- 10 LRC- 10R
Max. speed (rpm) 10000
Max rcf (g) 10750
Temperature °C NA -20.0 – 40.0 (Depend on speed)
Max. Volume (ml) 6 x 200
Timer (minutes) 1-99
Noise level (dB) ≤ 65
Power (W) 750 1000
Input Voltage 230, 50 / 60 Hz
Dimensions (mm) 450 x 650 x 600 900 x 650 x 600
Packing size (mm) 525 x 725 x 675 1030 x 780 x 730
ROTORS AND ACCESSORIES
Rotor No. Type Of Rotors Speed (rpm) RCF (g)
A6-200 6 x 200 ml fixed angle rotor with round bottom polypropylene tubes 7500 8800
A6-250 6 x 250 ml angle rotor suitable for polypropylene bottles 7000 7200
A6-500 6 x 500 ml angle rotor suitable for polypropylene bottles 7000 8200
A8-100 8 x 100 ml Fixed angle rotor with round bottom polypropylene tubes 7000 8900
A12-50 12 x 50 ml Fixed angle rotor with round bottom polypropylene tubes 8000 10700
A12-25 12 x 25 ml Fixed angle rotor with round bottom polypropylene tubes 7000 7100
A36-15 36 x 15 ml angle rotor with round bottom polypropylene tubes 8000 9300
A6-50 6 x 50 ml angle rotor with round bottom polypropylene tubes 10000 12250
A8-50 8 x 50 ml angle rotor with round bottom polypropylene tubes 10000 13500
A12-50 12 x50 ml angle rotor with round bottom polypropylene tubes 8000 10700
A24-15 24 x15 ml angle rotor with round bottom polypropylene tubes 7500 8800
A12-15 12 x15 ml angle rotor with round bottom polypropylene tubes 10000 11200
A48-2 48 x 2 ml Fixed angle rotor with polypropylene micro tubes 10000 10500
A24-2 24 x 2 ml Fixed angle rotor with polypropylene micro tubes 10000 10500
Fixed Angle rotor suitable for conical bottom polypropylene tube
A6-50C 12 x50 ml angle rotor with conical polypropylene tubes 8000 9300
A10-15C 36 x15 ml angle rotor with conical polypropylene tubes 7000 7100
SWING OUT ROTORS
S4-200 4 x 200 ml swing out rotor with round bottom polypropylene tubes 4000 3040
S4-100 4 x 100 ml swing out rotor with round bottom polypropylene tubes 4000 3040
S4-250 4 x 250 ml swing out rotor with round bottom polypropylene tubes 4000 3040
S105-5 108 x 5 ml swing out rotor suitable for RIA tubes 4000 3040

PRP CENTRIFUGE

Labtop micro controller based PRP centrifuge Cat. No. LLC – 4PR is refrigerated version of LLC-4P and it is designed for PRP extraction within shortest possible time, with programmable acceleration and deceleration time

SALIENT FEATURES:

  • Maintenance free brushless motor
  • Can accommodate various PRP tubes
  • Colour display with touch screen
  • User friendly programs
  • Display of rpm, rcf, time in a single screen
TECHNICAL SPECIFICATION
Cat. No. LLC- 6P LLC- 6PR
Max. speed (rpm) 4000
Max rcf (g) 2690
Max. Volume (ml) 4 x 20 ml PRP Tube
Temperature (°C) X -20.0 – 40.0 (depend on speed)
Accuracy (°C) X ± 1.0
Temperature sensor X PT-100
Timer (minutes) 1-99
Noise level (dB) ≤ 65 dB
Power (W) 300 500
Input voltage (VAC) 230 , 50/60 Hz
Dimensions (mm) 480 x 400 x 300 600 x 400 x 300
Packing size (mm) 530x450x350 650x450x350
Net Weight (kg) 22 42
Gross weight (Kg) 32 65

PRP Therapy

Platelet Rich Plasma therapy uses injections of a concentration of a patient’s own platelets to accelerate the healing of injured tendons, ligaments, muscles and joints
Labtop micro controller based laboratory centrifuges are suitable for routine work in medical and industrial laboratories. This centrifuge has maintenance free Brushless motor with frequency drive, Graphic display, motorised door lock, Timer and programmable acceleration and deceleration and Cat. No. LLC – 5R is refrigerated version of LLC-5
Motorised Safety door interlock on the centrifuge ensures that the rotor does not run when door is open while the cover cannot be opened unless rotor comes to complete stop.

SALIENT FEATURES:

  • Maintenance free brushless motor
  • Rotor selection
  • Electronic Safety door lock
  • Imbalance cut off with error messages
  • Colour display with touch screen
  • Can fit any type of tubes in a single rotor

SALIENT FEATURES:

  • Maintenance free brushless motor
  • Rotor selection
  • Electronic Safety door lock
  • Imbalance cut off with error messages
  • Colour display with touch screen
  • Can fit any type of tubes in a single rotor
TECHNICAL SPECIFICATION
Cat. No. LLC- 5 LLC- 5R LLC-6
Max. speed (rpm) 5000 6000
Max rcf (g) 5470 2690
Max. Capacity (ml) 4 x 250 6 x 50
Max. Volume (ml) 1000 300
Temperature (°C) Nil 0.0°C Nil
Timer (minutes) 1 – 99
Noise level (dB) ≤ 65 dB
Power (W) 300 500 250
Input voltage (VAC) 230, 50 / 60 Hz
Dimensions (mm) 530 x 420 x 350 620 x 420 x 350 480 x 400 x 300
Packing size (mm) 585x485x400 750x485x400 550x450x350
Net Weight (kg) 60 75 30
Gross weight (Kg) 75 100 45
ROTOR AND ACCESSORIES
Cat. No. Rotor No. Rotor Speed (rpm) RCF (g)

LLC-5 LLC-5R

SWING OUT ROTORS
S4-100

4 x100 ml swing out  rotor with Stainless steel tubes

5000 4650
S8-50

8 x50 ml swing out  rotor with Stainless steel tubes

5000 4750
S4-50

4 x50 ml swing out  rotor with Stainless steel tubes

5000 4745
S32-15

32x15ml swing out  rotor with Stainless steel tubes

4000 3000
S32-5

32×5 ml swing out rotor with Stainless steel tubes

4000 2810
S32-2

32×2 ml swing out rotor with Stainless steel tubes

4000 2810
S48-2

48×5 ml swing out rotor with Stainless steel tubes

4000 2910
S48-2

48×2 ml swing out rotor with Stainless steel tubes

4000 2910
S72-5

72×5 ml swing out rotor with Stainless steel tubes

4000 2810
S72-2

72×2 ml swing out rotor with Stainless steel tubes

4000 2810
S2-96P

2×96 swing out rotor with Stainless steel tubes

4000 2390

LLC-6

FIXED ANGLE ROTORS

A16-15

16 x15 ml angle rotor with Stainless steel tubes

5400 3800

A12-15

12 x15ml angle rotor with Stainless steel tubes

5400 3800

A8-15

8 x15 ml angle rotor with Stainless steel tubes

5500 4000

A6-50

6 x 50 ml angle rotor with Stainless steel tubes

5400 3800

A4-50

4 x 50 ml angle rotor with Stainless steel tubes

5500 4000
SWING OUT ROTORS

S16-15

16 x15 ml swing out with Stainless steel tubes

4100 3000

S12-15

12 x15 ml swing out with Stainless steel tubes

4100 3000

S8-15

8 x 15 ml swing out with Stainless steel tubes

4300 3200

S4-50

4 x 50 ml swing out with Stainless steel tubes

4100 3000

S6-50

6 x 50 ml swing out with Stainless steel tubes

4000 2800

Documentation:  LABTOP offers DQ IQ, OQ and PQ with documentation, reports, calibration and test certificates.
Calibration:
The Equipment is calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Testing Laboratory (ERTL West) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories (NPL).

Service and Support
The training undertaken by our Channel partners and engineers is of the highest standard in the industry, ensuring that our customers are supported by the highest level of technical expertise and as such can be assured that their equipment will perform to the standards required at all times.

Our wide network of Engineers/Technicians enables us to respond to any technical query, ensuring that our customers receive the maximum benefit from their equipment.

NB: Specification subject to change without prior notice

Leading Manufacturers, Exporters And Marketers Of High Speed Refrigerated Centrifuge
Scroll Up
error: Content is protected !!