High Speed Refrigerated Centrifuge

Home / Centrifuges / high speed refrigerated centrifuge

High Speed Refrigerated Centrifuge

Labtop micro controller based laboratory centrifuge Cat. No. LRC – 10R is Refrigerated version of LRC-10 and it is used in pathology laboratories and research centres. Motorised Safety door interlock on the centrifuge ensures that the rotor does not run with door open while the cover cannot be opened unless rotor comes to complete stop.

SALIENT FEATURES:

In built pre cooling programme
Facility to Set rpm or RCF
Maintenance free Brush less induction motor
Variable frequency drive
10 acceleration and deceleration programs
Self diagnostic system with error messages
Castor wheel for ease of mobility
Adjustable Levelling jack
Automatic rotor identification
Colour display with touch screen

Labtop micro controller based High speed refrigerated research centrifuge LRC – 20R is useful for centrifugation of temperature sensitive materials and widely used in research centres, Bio technology, soil testing laboratories also used in medical laboratories and educational Institutes.
Catalogue number LRC – 20 is a non refrigerated version of LRC – 20R and all other features are same as below.

SALIENT FEATURES:

Table top model
Colour display with touch screen
Automatic rotor identification
In built pre cooling programme
Hydraulic hinges for
Facility to Set rpm or RCF
Maintenance free Brush less induction motor
Variable frequency drive
10 acceleration and deceleration programs
Self diagnostic system with error messages
Automatic rotor identification

Technical Specifications
CAT. No.	LRC–25R
Max. Speed (rpm)	25000
Speed Accuracy (rpm)	± 50
Max rcf (g)	61250
Max. Volume (ml)	6 x 500
Temperature range(°C)	-20.0 – 40.0 (depend on speed)
Timer (min)	1-99
PC Connectivity	Ethernet
Data Storage	1000 lines
Noise level dB	≤ 65
Input Power (W)	1000
Input voltage (VAC)	230 , 50/60 Hz
Outer Siz (mm)	625 x 725 x 940
Packing Size (mm)	760x850x1070
Net Weight (kg)	220
Gross Weight (kg)	300

Technical Specifications
Cat. No.	LRC- 10	LRC- 10R
Max. speed (rpm)	10000
Max rcf (g)	10750
Temperature °C	NA	-20.0 – 40.0 (Depend on speed)
Max. Volume (ml)	6 x 200
Timer (minutes)	1-99
Noise level (dB)	≤ 65
Power (W)	750	1000
Input Voltage	230, 50 / 60 Hz
Dimensions (mm)	450 x 650 x 600	900 x 650 x 600
Packing size (mm)	525 x 725 x 675	1030 x 780 x 730

ROTORS AND ACCESSORIES
Rotor No.	Type Of Rotors	Speed (rpm)	RCF (g)
A6-200	6 x 200 ml fixed angle rotor with round bottom polypropylene tubes	7500	8800
A6-250	6 x 250 ml angle rotor suitable for polypropylene bottles	7000	7200
A6-500	6 x 500 ml angle rotor suitable for polypropylene bottles	7000	8200
A8-100	8 x 100 ml Fixed angle rotor with round bottom polypropylene tubes	7000	8900
A12-50	12 x 50 ml Fixed angle rotor with round bottom polypropylene tubes	8000	10700
A12-25	12 x 25 ml Fixed angle rotor with round bottom polypropylene tubes	7000	7100
A36-15	36 x 15 ml angle rotor with round bottom polypropylene tubes	8000	9300
A6-50	6 x 50 ml angle rotor with round bottom polypropylene tubes	10000	12250
A8-50	8 x 50 ml angle rotor with round bottom polypropylene tubes	10000	13500
A12-50	12 x50 ml angle rotor with round bottom polypropylene tubes	8000	10700
A24-15	24 x15 ml angle rotor with round bottom polypropylene tubes	7500	8800
A12-15	12 x15 ml angle rotor with round bottom polypropylene tubes	10000	11200
A48-2	48 x 2 ml Fixed angle rotor with polypropylene micro tubes	10000	10500
A24-2	24 x 2 ml Fixed angle rotor with polypropylene micro tubes	10000	10500
Fixed Angle rotor suitable for conical bottom polypropylene tube
A6-50C	12 x50 ml angle rotor with conical polypropylene tubes	8000	9300
A10-15C	36 x15 ml angle rotor with conical polypropylene tubes	7000	7100
SWING OUT ROTORS
S4-200	4 x 200 ml swing out rotor with round bottom polypropylene tubes	4000	3040
S4-100	4 x 100 ml swing out rotor with round bottom polypropylene tubes	4000	3040
S4-250	4 x 250 ml swing out rotor with round bottom polypropylene tubes	4000	3040
S105-5	108 x 5 ml swing out rotor suitable for RIA tubes	4000	3040

PRP CENTRIFUGE

Labtop micro controller based PRP centrifuge Cat. No. LLC – 4PR is refrigerated version of LLC-4P and it is designed for PRP extraction within shortest possible time, with programmable acceleration and deceleration time

SALIENT FEATURES:

TECHNICAL SPECIFICATION
Cat. No.	LLC- 6P	LLC- 6PR
Max. speed (rpm)	4000
Max rcf (g)	2690
Max. Volume (ml)	4 x 20 ml PRP Tube
Temperature (°C)	X	-20.0 – 40.0 (depend on speed)
Accuracy (°C)	X	± 1.0
Temperature sensor	X	PT-100
Timer (minutes)	1-99
Noise level (dB)	≤ 65 dB
Power (W)	300	500
Input voltage (VAC)	230 , 50/60 Hz
Dimensions (mm)	480 x 400 x 300	600 x 400 x 300
Packing size (mm)	530x450x350	650x450x350
Net Weight (kg)	22	42
Gross weight (Kg)	32	65

PRP Therapy

Platelet Rich Plasma therapy uses injections of a concentration of a patient’s own platelets to accelerate the healing of injured tendons, ligaments, muscles and joints

Labtop micro controller based laboratory centrifuges are suitable for routine work in medical and industrial laboratories. This centrifuge has maintenance free Brushless motor with frequency drive, Graphic display, motorised door lock, Timer and programmable acceleration and deceleration and Cat. No. LLC – 5R is refrigerated version of LLC-5

Motorised Safety door interlock on the centrifuge ensures that the rotor does not run when door is open while the cover cannot be opened unless rotor comes to complete stop.

SALIENT FEATURES:

Maintenance free brushless motor
Rotor selection
Electronic Safety door lock
Imbalance cut off with error messages
Colour display with touch screen
Can fit any type of tubes in a single rotor

SALIENT FEATURES:

Maintenance free brushless motor
Rotor selection
Electronic Safety door lock
Imbalance cut off with error messages
Colour display with touch screen
Can fit any type of tubes in a single rotor

TECHNICAL SPECIFICATION
Cat. No.	LLC- 5	LLC- 5R	LLC-6
Max. speed (rpm)		5000		6000
Max rcf (g)		5470		2690
Max. Capacity (ml)		4 x 250		6 x 50
Max. Volume (ml)		1000		300
Temperature (°C)	Nil		0.0°C	Nil
Timer (minutes)	1 – 99
Noise level (dB)	≤ 65 dB
Power (W)		300	500	250
Input voltage (VAC)	230, 50 / 60 Hz
Dimensions (mm)		530 x 420 x 350	620 x 420 x 350	480 x 400 x 300
Packing size (mm)		585x485x400	750x485x400	550x450x350
Net Weight (kg)		60	75	30
Gross weight (Kg)		75	100	45

ROTOR AND ACCESSORIES
Cat. No.	Rotor No.	Rotor	Speed (rpm)	RCF (g)
LLC-5 LLC-5R	SWING OUT ROTORS
	S4-100	4 x100 ml swing out rotor with Stainless steel tubes	5000		4650
	S8-50	8 x50 ml swing out rotor with Stainless steel tubes	5000		4750
	S4-50	4 x50 ml swing out rotor with Stainless steel tubes	5000		4745
	S32-15	32x15ml swing out rotor with Stainless steel tubes	4000		3000
	S32-5	32×5 ml swing out rotor with Stainless steel tubes	4000		2810
	S32-2	32×2 ml swing out rotor with Stainless steel tubes	4000		2810
	S48-2	48×5 ml swing out rotor with Stainless steel tubes	4000		2910
	S48-2	48×2 ml swing out rotor with Stainless steel tubes	4000		2910
	S72-5	72×5 ml swing out rotor with Stainless steel tubes	4000		2810
	S72-2	72×2 ml swing out rotor with Stainless steel tubes	4000		2810
	S2-96P	2×96 swing out rotor with Stainless steel tubes	4000		2390
LLC-6	FIXED ANGLE ROTORS
	A16-15	16 x15 ml angle rotor with Stainless steel tubes	5400		3800
	A12-15	12 x15ml angle rotor with Stainless steel tubes	5400		3800
	A8-15	8 x15 ml angle rotor with Stainless steel tubes	5500		4000
	A6-50	6 x 50 ml angle rotor with Stainless steel tubes	5400		3800
	A4-50	4 x 50 ml angle rotor with Stainless steel tubes	5500		4000
	SWING OUT ROTORS
	S16-15	16 x15 ml swing out with Stainless steel tubes	4100		3000
	S12-15	12 x15 ml swing out with Stainless steel tubes	4100		3000
	S8-15	8 x 15 ml swing out with Stainless steel tubes	4300		3200
	S4-50	4 x 50 ml swing out with Stainless steel tubes	4100		3000
	S6-50	6 x 50 ml swing out with Stainless steel tubes	4000		2800

Documentation: LABTOP offers DQ IQ, OQ and PQ with documentation, reports, calibration and test certificates.
Calibration:
The Equipment is calibrated with the help of master calibrator, which is certified for its accuracy by Electronics Regional Testing Laboratory (ERTL West) Government of India recognized testing laboratory with traceable reference to National Physical Laboratories (NPL).

Service and Support
The training undertaken by our Channel partners and engineers is of the highest standard in the industry, ensuring that our customers are supported by the highest level of technical expertise and as such can be assured that their equipment will perform to the standards required at all times.

Our wide network of Engineers/Technicians enables us to respond to any technical query, ensuring that our customers receive the maximum benefit from their equipment.

NB: Specification subject to change without prior notice

Leading Manufacturers, Exporters And Marketers Of High Speed Refrigerated Centrifuge

High Speed Refrigerated Centrifuge